7Volte 35Amp high frequency switching water ionization system power
supply Specification and parameter
Description of high frequency electrolytic power:
Water treatment power supply electrolysis of water to produce
hydrogen and oxygen. The electrolysis of water basically is under
external electric field to split water into H2 and O2. DC power
supply electrolysis is a very powerful means to promote redox
reactions, many other redox difficult to react, can be via DC power
supply electrolysis to achieve
The main control board adopts high anti-interference high-power
digital circuit trigger system, which has the control
anti-interference ability. It has the advantages of high control
precision, good stability and reliable operation.
6. The box body adopts cutting magnetic chain to reduce eddy
current consumption, and the box body adopts integral spraying.
Control method: comprehensive simulation control and computer
control.
| input voltage | 220v 1 phase 50/60hz |
| Output voltage | 0~7v adjustable |
| Voltage stability | 0~35a adjustable |
| Current stability | ≤1% |
| Ripple factor | 1%-2% |
| efficiency | ≥90% |
| weight | 12kg |
| dimension | 270*220*88mm |
| Stabilization mode | Current stabilization/Voltage stabilization (Switchable easily) |
| Adjustment range | Voltage/Current from 0-100% continuously adjustable within rated
range |
| Cooling system | Air cooling |
| Control method | local control/remote control/plc control |
| Display contents | Voltage meter/Current meter/Working/Over temp/Error, |
| Protection method | Input over-voltage/Under-voltage/Over current/Output short/Over
heating self protection etc.. |
| Operating temperature | -20-50℃ |
| Ambient temperature | -30-65℃ |
| Ambient humidity | ≤90% |
Application of high frequency electrolytic power supply:
Mainly used in non-ferrous metal electrolysis: aluminum, magnesium,
zinc, lead, copper, manganese and manganese dioxide; gold, silver
and other metals smelting; neodymium iron boron rare earth
smelting; hard alloy, diamond smelting; salt water, potassium
electrolysis to produce caustic soda, potash, sodium system; fire
electrical heating materials, and other types of high-power DC
power supply.
| 1, Placing rectifier and keep the body stability; ensure good
ventilation. |
| 2, Checking anodizing rectifier out cover if loosing. |
| 3, Connecting shell to ground to prevent static electricity. |
| 4, Conecting the AC input wire |
| 5, Connecting the DC output copper bars |
| 6, Connecting the rectifier remote control box,if local control
,skip this step |
| 7, Turn on air switch, then the fan starts to rotate and the power
indicator light. |
| 8, Clockwise rotation adjustment button, voltmeter degree
increases, working indicate light lighting. |
| 9, Adjust knob to maximum, then the voltmeter should indicate the
rated voltage, current meter indicates the load volume accordingly. |
| 10, Disconnect the air switch, turn off the rectifier |
